- The NEW EZ Clutch Adjustor Upgrade Kit converts the factory upper clutch cable adjustor to a screw type adjustor while reinforcing the cable.
- The adjustor also works as a repair part for broken H-D factory cable adjustors.
- Works with stock cables and Fat Baggers' Ez Clutch Extensions.
- Dimensions: 1/2-20 threaded split adjustor.
- MADE IN THE USA!
- This product is for 2021 FLHT, FLHTK, FLHX, FLHXS, FLHXSE, FLHTKSE, FLHTCUTG, FLHTCUTGSE, FLTRK, FLTRXS, FLTRX, FLTRXSE, FLHR, FLHRXS, (Cable Clutch Models),
Shop Fat Baggers Motorcycle Products
-
EZ Clutch Adjustor Upgrade Kit -
This part is used to replace the stock plastic housing that comes factory on H-D bikes. Features:- Aluminum upgrade
- Powdercoated finish
-
EZ Clutch Adjustor Upgrade Kit- The NEW EZ Clutch Adjustor Upgrade Kit converts the factory upper clutch cable adjustor to a screw type adjustor while reinforcing the cable.
- The adjustor also works as a repair part for broken H-D factory cable adjustors.
- Works with stock cables and Fat Baggers' Ez Clutch Extensions.
- Dimensions: 1/2-20 threaded split adjustor.
- MADE IN THE USA!
- This product is for 2021 FLHT, FLHTK, FLHX, FLHXS, FLHXSE, FLHTKSE, FLHTCUTG, FLHTCUTGSE, FLTRK, FLTRXS, FLTRX, FLTRXSE, FLHR, FLHRXS, (Cable Clutch Models), and 18-23 Softails.
-
EZ Install 4" Clutch Cable Extension for 2021, 2022 Touring Models- No more need to replace the clutch cable on your motorcycle.
- The NEW EZ Install Clutch Cable Extension installs in minutes without removing the exhaust and draining the tranny oil.
- The 4" Clutch Cable Extension is for 2021, 2022 Touring Models.
- NOTE: Our handlebar kits do not replace existing lines. We extend them!
- MADE IN THE USA!
- This product is for 2021, 2022 FLHT, FLHTK, FLHX, FLHXS, FLHXSE, FLHTKSE, FLHTCUTG, FLHTCUTGSE, FLTRK, FLTRXS, FLTRX, FLTRXSE, FLHR, FLHRXS, (Cable Clutch Models).
-
New EZ Instal Upper Clutch Cable- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- MADE IN THE USA
- Stock replacment cable
- This product is used on the following Models:
- 2023-2024 FLHXSE (CVO Street Glide)
- 2023-2024 FLTRSE (CVO Road Glide)
- 2024 FLHX (Street Glide)
- 2024 FLTR (Road Glide)
-
Features:- Our brake line extension can be installed in minutes due to a manifold system that we designed, which allows us to bolt to the stock line with no need for a computer and hours of bleeding.
- Our design incorporates a one-way valve speed bleeder.
- The process for bleeding our brake line extension is to open the bleeder valve by unscrewing it.
- Then, we place a hose on the bleed valve, to a catch container.
- Lastly, we pump the lever 8-12 strokes, close the bleed valve, and add fluid.
- This process takes minutes to do and does not introduce any air into the lower clutch or brake lines.
- Made in the USA
- For 10-16" handlebars on 08-13 CVO Models Street Glide/Electra Glide (Hydraulic Clutch)
- *Order 2* *one for brake, one for hydraulic clutch*
- For 14" - 16" handlebars on 08-13 Street Glide/Electra Glide Models
- For 14" - 16" handlebars on 14-22 Street Glide/Electra Glide Models
-
New EZ Instal Upper Clutch Cable- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- MADE IN THE USA
- 4" Over Stock Upper Clutch Cable
- This product is used on 12" handlebars for the following Models:
- 2024 FLHX (Street Glide)
- 2023-2024 FLHXSE (CVO Street Glide)
- This product is used on 14" handlebars for the following Models:
- 2023-2024 FLTRSE (CVO Road Glide)
- 2024 FLTR (Road Glide)
-
WIRE EXTENSIONS FOR H-D HEATED GRIP WORKS WITH 12"-18" BARS- Features:
- Cut-n-splice to desired length
- Made in the U.S.A.
-
PRODUCT NAME CABLE KIT TYPE EXTENSION COLOR/FINISH BLACK WIRE/CABLE LENGTH (18") / 18" WIRE GAUGE 16 AWG UNITS KIT
- Features:
-
New EZ Instal Upper Clutch Cable- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- MADE IN THE USA
- 2" Over Stock Upper Clutch Cable
- This product is used on 10" & 11" handlebars for the following Models:
- 2023 FLHXSE (CVO Street Glide)
- 2024 FLHX (Street Glide)
- This product is used on 12" handlebars for the following Models:
- 2023-2024 FLTRSE (CVO Road Glide)
- 2024 FLTR (Road Glide)
-
Features:- Our brake line extension can be installed in minutes due to a manifold system that we designed, which allows us to bolt to the stock line with no need for a computer and hours of bleeding.
- Our design incorporates a one-way valve speed bleeder.
- The process for bleeding our brake line extension is to open the bleeder valve by unscrewing it.
- Then, we place a hose on the bleed valve, to a catch container.
- Lastly, we pump the lever 8-12 strokes, close the bleed valve, and add fluid.
- This process takes minutes to do and does not introduce any air into the lower clutch or brake lines.
- Made in the USA
- For 10-16" handlebars on 08-13 CVO Models Street Glide/Electra Glide (Hydraulic Clutch)
- *Order 2* *one for brake, one for hydraulic clutch*
- For 14" - 16" handlebars on 08-13 Street Glide/Electra Glide Models
- For 14" - 16" handlebars on 14-22 Street Glide/Electra Glide Models
-
New EZ Instal Upper Clutch Cable- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- MADE IN THE USA
- 2" Over Stock Upper Clutch Cable
- This product is used on 10" & 11" handlebars for the following Models:
- 2023 FLHXSE (CVO Street Glide)
- 2024 FLHX (Street Glide)
- This product is used on 12" handlebars for the following Models:
- 2023-2024 FLTRSE (CVO Road Glide)
- 2024 FLTR (Road Glide)
-
EZ Install 6" Clutch Cable Extension for 2021, 2022 Touring Models- No more need to replace the clutch cable on your motorcycle.
- The NEW EZ Install Clutch Cable Extension installs in minutes without removing the exhaust and draining the tranny oil.
- The 6" Clutch Cable Extension is for 2021, 2022 Touring Models.
- NOTE: Our handlebar kits do not replace existing lines. We extend them!
- MADE IN THE USA!
- This product is for 2021, 2022 FLHT, FLHTK, FLHX, FLHXS, FLHXSE, FLHTKSE, FLHTCUTG, FLHTCUTGSE, FLTRK, FLTRXS, FLTRX, FLTRXSE, FLHR, FLHRXS, (Cable Clutch Models).
-
New EZ Instal Upper Clutch Cable- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- MADE IN THE USA
- Stock replacment cable
- This product is used on the following Models:
- 2023-2024 FLHXSE (CVO Street Glide)
- 2023-2024 FLTRSE (CVO Road Glide)
- 2024 FLHX (Street Glide)
- 2024 FLTR (Road Glide)
-
New EZ Instal Upper Clutch Cable- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- MADE IN THE USA
- 6" Over Stock Upper Clutch Cable
- This product is used on 14" handlebars for the following Models:
- 2024 FLHX (Street Glide)
- 2023-2024 FLHXSE (CVO Street Glide)
- This product is used on 16" handlebars for the following Models:
- 2023-2024 FLTRSE (CVO Road Glide)
- 2024 FLTR (Road Glide)
-
New EZ Instal Upper Clutch Cable- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- MADE IN THE USA
- 2" Over Stock Upper Clutch Cable
- This product is used on 10" & 11" handlebars for the following Models:
- 2023 FLHXSE (CVO Street Glide)
- 2024 FLHX (Street Glide)
- This product is used on 12" handlebars for the following Models:
- 2023-2024 FLTRSE (CVO Road Glide)
- 2024 FLTR (Road Glide)
-
Features:- Our brake line extension can be installed in minutes due to a manifold system that we designed, which allows us to bolt to the stock line with no need for a computer and hours of bleeding.
- Our design incorporates a one-way valve speed bleeder.
- The process for bleeding our brake line extension is to open the bleeder valve by unscrewing it.
- Then, we place a hose on the bleed valve, to a catch container.
- Lastly, we pump the lever 8-12 strokes, close the bleed valve, and add fluid.
- This process takes minutes to do and does not introduce any air into the lower clutch or brake lines.
- Made in the USA
- For 10-16" handlebars on 08-13 CVO Models Street Glide/Electra Glide (Hydraulic Clutch)
- *Order 2* *one for brake, one for hydraulic clutch*
- For 14" - 16" handlebars on 08-13 Street Glide/Electra Glide Models
- For 14" - 16" handlebars on 14-22 Street Glide/Electra Glide Models
-
Details
FBI EZ Install Kit- Kits include only the necessary components needed to install handlebars based on the model and height of handlebar.
- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- Made in the USA
- EZ install black vinyl 4" upper clutch cable
- Black brake line extension
- Wire extensions (3 Piece kit to lengthen OEM H-D Handlebar switches & TBW sensor)
- Ropes
- Lube
- Zip ties
- This product is used on 11" & 12" handlebars for the following Models:
- 2023-2024 FLHXSE (CVO Street Glide)
- 2024 FLHX (Street Glide)
-
New EZ Instal Upper Clutch Cable- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- MADE IN THE USA
- 2" Over Stock Upper Clutch Cable
- This product is used on 10" & 11" handlebars for the following Models:
- 2023 FLHXSE (CVO Street Glide)
- 2024 FLHX (Street Glide)
- This product is used on 12" handlebars for the following Models:
- 2023-2024 FLTRSE (CVO Road Glide)
- 2024 FLTR (Road Glide)
-
New EZ Instal Upper Clutch Cable- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- MADE IN THE USA
- Stock replacment cable
- This product is used on the following Models:
- 2023-2024 FLHXSE (CVO Street Glide)
- 2023-2024 FLTRSE (CVO Road Glide)
- 2024 FLHX (Street Glide)
- 2024 FLTR (Road Glide)
-
The FBI Removable Tour Pack Mount has a quick release and is for chopped tour packs. It is light duty. Fitment: For 96-08 models -
97-08 Docking Kit for Overlay Fenders
-
Features:- Our brake line extension can be installed in minutes due to a manifold system that we designed, which allows us to bolt to the stock line with no need for a computer and hours of bleeding.
- Our design incorporates a one-way valve speed bleeder.
- The process for bleeding our brake line extension is to open the bleeder valve by unscrewing it.
- Then, we place a hose on the bleed valve, to a catch container.
- Lastly, we pump the lever 8-12 strokes, close the bleed valve, and add fluid.
- This process takes minutes to do and does not introduce any air into the lower clutch or brake lines.
- Made in the USA
- For 10-16" handlebars on 08-13 CVO Models Street Glide/Electra Glide (Hydraulic Clutch)
- *Order 2* *one for brake, one for hydraulic clutch*
- For 14" - 16" handlebars on 08-13 Street Glide/Electra Glide Models
- For 14" - 16" handlebars on 14-22 Street Glide/Electra Glide Models
-
Details
FBI EZ Install Kit- Kits include only the necessary components needed to install handlebars based on the model and height of handlebar.
- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- Made in the USA
- EZ install stainless 4" upper clutch cable
- Stainless brake line extension
- Wire extensions (3 Piece kit to lengthen OEM H-D Handlebar switches & TBW sensor)
- Ropes
- Lube
- Zip ties
- This product is used on 11" & 12" handlebars for the following Models:
- 2023-2024 FLHXSE (CVO Street Glide)
- 2024 FLHX (Street Glide)
-
Details
FBI EZ Install Kit- Kits include only the necessary components needed to install handlebars based on the model and height of handlebar.
- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- Made in the USA
- EZ install black vinyl 4" upper clutch cable
- Black brake line extension
- Wire extensions (3 Piece kit to lengthen OEM H-D Handlebar switches & TBW sensor)
- Ropes
- Lube
- Zip ties
- This product is used on 11" & 12" handlebars for the following Models:
- 2023-2024 FLHXSE (CVO Street Glide)
- 2024 FLHX (Street Glide)
-
New EZ Instal Upper Clutch Cable- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- MADE IN THE USA
- 2" Over Stock Upper Clutch Cable
- This product is used on 10" & 11" handlebars for the following Models:
- 2023 FLHXSE (CVO Street Glide)
- 2024 FLHX (Street Glide)
- This product is used on 12" handlebars for the following Models:
- 2023-2024 FLTRSE (CVO Road Glide)
- 2024 FLTR (Road Glide)
-
New EZ Instal Upper Clutch Cable- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- MADE IN THE USA
- 2" Over Stock Upper Clutch Cable
- This product is used on 10" & 11" handlebars for the following Models:
- 2023 FLHXSE (CVO Street Glide)
- 2024 FLHX (Street Glide)
- This product is used on 12" handlebars for the following Models:
- 2023-2024 FLTRSE (CVO Road Glide)
- 2024 FLTR (Road Glide)
-
Details
FBI EZ Install Kit
- Kits include only the necessary components needed to install handlebars based on the model and height of handlebar.
- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- Made in the USA
Items included in this kit:
- EZ install black vinyl 4" upper clutch cable
- Black brake line extension
- Wire extensions (3 Piece kit to lengthen OEM H-D Handlebar switches & TBW sensor)
- Ropes
- Lube
- Zip ties
Fitment:
- This product is used on 11" & 12" handlebars for the following Models:
- 2023-2024 FLHXSE (CVO Street Glide)
- 2024 FLHX (Street Glide)
Drag Specialties Part #:
-
New EZ Instal Upper Clutch Cable- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- MADE IN THE USA
- 2" Over Stock Upper Clutch Cable
- This product is used on 10" & 11" handlebars for the following Models:
- 2023 FLHXSE (CVO Street Glide)
- 2024 FLHX (Street Glide)
- This product is used on 12" handlebars for the following Models:
- 2023-2024 FLTRSE (CVO Road Glide)
- 2024 FLTR (Road Glide)
-
New EZ Instal Upper Clutch Cable- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- MADE IN THE USA
- 4" Over Stock Upper Clutch Cable
- This product is used on 12" handlebars for the following Models:
- 2023-2024 FLHXSE (CVO Street Glide)
- 2024 FLHX (Street Glide)
- This product is used on 14" handlebars for the following Models:
- 2023-2024 FLTRSE (CVO Road Glide)
- 2024 FLTR (Road Glide)
-
Features
- This handlebar wiring extension is used to extend the wiring to a set of OEM H-D handlebar switches
- Includes:
- male and female Molex terminals
- color matching wire
- wire heat shrink
- Intended for front turn signals mounted on handlebar switch housings
- De-pin factory harness connector and install
- No crimping necessary
- Made in the U.S.A.
Fitment
-
(12″ 11-Up Softail, ’12-Up Dyna, and all ’14-Up Models except V-Rod and Touring)
-
The FBI Fixed Removable Tour Pack Mount is rigid, with no movement in it. It will handle heavier weight loads, and king tour packs. It bolts on and off. Fitment: For 96-08 models -
Features:- Includes 26-OEM color matching wires
- Male & Female terminals are installed using MIL-SPEC machinery
- Comes with 26-pieces of 3/16″ OD heat shrink for the terminals and 1/2″ shrink for the loom
- Made in the USA
-
FBI EZ Install Kit- EZ Install: No more need to fight internal wiring with our EZ install handlebars. You can install wiring in minutes!
- Kits include only the necessary components needed to install handlebars based on the model and height of handlebar. Certain models and heights of handlebar kits will include brake line extension, clutch line/cable extension, wiring harness. Some of the shorter handlebar kits will only have a wiring harness or only a clutch line/cable extension. Each kit is priced accordingly.
- Made in the USA
- NOTE: Our handlebar kits do not replace existing lines. We extend them!
-
FBI EZ Install Kit- EZ Install: No more need to fight internal wiring with our EZ install handlebars. You can install wiring in minutes!
- Kits include only the necessary components needed to install handlebars based on the model and height of handlebar. Certain models and heights of handlebar kits will include brake line extension, clutch line/cable extension, wiring harness. Some of the shorter handlebar kits will only have a wiring harness or only a clutch line/cable extension. Each kit is priced accordingly.
- Made in the USA
- NOTE: Our handlebar kits do not replace existing lines. We extend them!
-
New EZ Instal Upper Clutch Cable- NEW EZ Install Clutch Cable installs without removing the exhaust and draining the tranny oil.
- New Cable adjuster placement next to clutch lever no tools needed to adjust
- Our EZ Install cable kit removes and replaces the OEM plastic tubes, connector & adjuster.
- Available in Black Vinyl Or Stainless Steel Braided
- MADE IN THE USA
- 2" Over Stock Upper Clutch Cable
- This product is used on 10" & 11" handlebars for the following Models:
- 2023 FLHXSE (CVO Street Glide)
- 2024 FLHX (Street Glide)
- This product is used on 12" handlebars for the following Models:
- 2023-2024 FLTRSE (CVO Road Glide)
- 2024 FLTR (Road Glide)
